Networking Comware Data Center Switch 48p SFP+ 1G/10G 6p QSFP28 100G 5720

Networking Comware Data Center Switch 48p SFP+ 1G/10G 6p QSFP28 100G 5720
Brand: Hewlett-Packard Enterprise
Part Number: S2N58A
Stock:
Real time Stock Check

£14,236.66 (Excl VAT)
£17,084.00  (incl. VAT)

Hewlett-Packard Enterprise
Introduction
HPE Networking Comware Switch Series 5720 is designed to cater to diverse customer needs. This cost-effective access switch offers hybrid SFP+ and 10GBASE-T options, along with multigigabit support on 10GBASE-T ports, allowing scalability from 10GbE SFP+ to 100G QSFP28. These data center leaf / access layer switches come with MACsec support and 10GBASE-T additional modules. Features such as distributed resilient network interconnect (DRNI) and HPE Intelligent Resilient Fabric (IRF) enhance network resiliency while redundant pluggable power supplies provide a dynamic and highly available network. Moreover, these switches support HPE Intelligent Management Center (IMC), which delivers a consistent network manageability experience. Streamline network management processes for greater efficiency through centralized configuration, compliance, policy management, monitoring, and troubleshooting.

What is new supporting point:
Cost-effective access switch with hybrid SFP+ and 10GBASE-T with multigigabit options on 10GBASE-T port—5G, 2.5G, 1G.
The Intelligent Resilient Fabric (IRF) technology enabling greater resilience and scalability with IRF stacking.
Virtual Extensible LAN (VXLAN) with lite Ethernet VPN (EVPN) allows greater flexibility, better performance with wirespeed, enhanced security, and better scalability.
Hardware-based MACsec enable end-to-end encrypted security.
DRNI combines multiple physical switches into one virtual distributed-relay (DR) system for doubling aggregate bandwidth, faster forwarding, resiliency, and high availability.
VXLAN and EVPN enable isolation and greater scalability of L2/L3 overlay services and multicast.
Management features
Switch type Managed
Switch layer L2/L3
Quality of Service (QoS) support Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports type No
SFP+ module slots quantity 48
QSFP+ module slots quantity 6
Network
10G support Yes
Flow control support Yes
Link aggregation Yes
Spanning tree protocol Yes
VLAN support Yes
Data transmission
Switching capacity 2560 Gbit/s
Throughput 1001 Mpps
MAC address table 280000 entries
Latency (10 Gbps) 3 µs
Jumbo frames support Yes
Packet buffer memory 8 MB
Security
Access Control List (ACL) Yes
IGMP snooping Yes
Protocols
Routing protocols BGP, MPLS, OSPF, RIP
Design
Rack mounting Yes
Stackable Yes
Form factor 1U
Product colour Black
Performance
Memory type SDRAM
Internal memory 4000 MB
Flash memory 4000 MB
Physical stacking (units) 9
Power
Power source AC
Power supply included Yes
AC input voltage 100 - 240 V
Power consumption (typical) 89 W
Power consumption note Dual AC 89 W
Power supply note AC: 2x JL592A/JL593A DC: 2x JL688A
DC input voltage 48 - 60 V
Power over Ethernet (PoE)
Power over Ethernet (PoE) No
Operational conditions
Operating temperature (T-T) 0 - 45 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 5 - 95%
Heat dissipation 887 BTU/h
Weight & dimensions
Width 440 mm
Depth 400 mm
Height 44 mm
Weight 7.9 kg
Other features
Latency < 3 µs
Memory and processor 4 GB flash, 4 GB SDRAM, packet buffer size: 32 M Quad Core ARMv8-Cortex-A72;
I/O ports 48 SFP+,6 QSFP28,1 Slot
Performance management IMC, IMC Orchestrator, CLI, out-of-band management, SNMP Manager, Telnet, FTP
No options for this product

Partners

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

Call us Now: 02920 333 000