| Introduction | |
|---|---|
| The HPE Aruba Networking CX 8360 v2 Switch Series is designed for next-generation core and aggregation layer of campuses, as well as virtual and highly dynamic data center environments. The switch series provides up to 4.8 Tbps switching capacity, with line-rate Gigabit Ethernet interfaces including support for HPE Smart Rate (1/2.5/5 Gbps), 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, and 100 Gbps connectivity in a compact 1U form factor. These switches deliver a fantastic investment for customers wanting to migrate from older 1/10GbE to faster 25GbE, or from 10/40GbE uplinks to 50/100GbE ports. In addition, the 48 and 32 x 25G port CX 8360 models support low-density MACsec ports and enable secured connectivity at 10GbE and 25GbE over unsecured domains. MACsec is also supported on 2 high-speed 40/100G ports on the CX 8360 48-port model. What is new supporting point: High availability with industry-leading HPE Aruba Networking Virtual Switching Extension (VSX) redundancy and redundant power supplies and fans High performance fully distributed architecture provides up to 4.8 Tbps switching and 1786 Mpps for forwarding Advanced Layer 2/3 feature set includes BGP, OSPF, VRF, EVPN, VXLAN and IPv6 The CX 8360 48 and 32 x 25G port models support low-density MACsec ports and enable secured connectivity at 10GbE and 25GbE over unsecured domains Intelligent monitoring and visibility are delivered by the HPE Aruba Networking CX Network Analytics Engine (NAE) 48-port 1/10/25G with 4 MACsec, 6-port of 40/100G with 2 MACsec (MACsec secured connectivity over untrusted domains) |
|
| Management features | |
| Switch type | Managed |
| Switch layer | L3 |
| Cloud-managed | Yes |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports type | No |
| USB Type-A ports quantity | 1 |
| Console port | RJ-45/USB Type-C |
| QSFP28 ports quantity | 2 |
| SFP28 ports quantity | 16 |
| Network | |
| Networking standards | IEEE 802.1AE, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x |
| 10G support | Yes |
| Port mirroring | Yes |
| Flow control support | Yes |
| Link aggregation | Yes |
| Spanning tree protocol | Yes |
| VLAN support | Yes |
| Virtual LAN features | Port-based VLAN |
| Number of VLANs | 4094 |
| Data transmission | |
| Switching capacity | 1200 Gbit/s |
| Throughput | 1309 Mpps |
| MAC address table | 212992 entries |
| Static route | Yes |
| Jumbo frames support | Yes |
| Packet buffer memory | 32 MB |
| Security | |
| DHCP features | DHCP relay, DHCP server |
| Access Control List (ACL) | Yes |
| IGMP snooping | Yes |
| SSH/SSL support | Yes |
| Authentication type | RADIUS, TACACS+ |
| Multicast features | |
| Multicast support | Yes |
| IPv4 multicast entries | 7000 |
| IPv6 multicast entries | 7000 |
| MLD entries | 7000 |
| Protocols | |
| Management protocols | SNMPv2c, SNMPv3 |
| Routing protocols | BGP4, MPLS, OSPF, RIP, RIPng, RIP-2 |
| IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
| Design | |
| Rack mounting | Yes |
| Stackable | No |
| Form factor | 1U |
| Redundant fans support | Yes |
| Airflow direction | Back-to-front airflow |
| Number of fans | 3 fan(s) |
| Performance | |
| Built-in processor | Yes |
| Processor frequency | 1800 MHz |
| Memory type | RAM / Flash |
| Internal memory | 16384 MB |
| Flash memory | 32000 MB |
| Power | |
| Power source | AC |
| Power supply included | Yes |
| Redundant power supply (RPS) support | Yes |
| Number of power supply units | 2 |
| AC input voltage | 200 - 240 V |
| AC input frequency | 47/63 Hz |
| Power consumption (max) | 325 W |
| Power consumption note | Maximum: 325W Idle: 110W |
| Power supply note | 2 field-replaceable and hot-swappable power supplies depending on the model |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | No |
| Other features | |
| Memory and processor | CPU: 1.8 GHz 4-core 64-bit RAM: 16 GB Flash/Storage: 32 GB Packet Buffer: 32 MB |
| I/O ports | 16-port of 1/10/25GbE (SFP/SFP+/SFP28) 2-port of 40/100GbE (QSFP+/QSFP28) (optional 1GBASE-T SFP and 10GBASE-T SFP+ transceivers and 4 x 10/25G breakout cables supported) |
| Performance management | RJ45 serial and USB-C console RJ45 Ethernet port USB-Type A |
| Fan | 3 field-replaceable and hot-swappable fans |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 15 - 95% |
| Storage relative humidity (H-H) | 15 - 95% |
| Operating altitude | 0 - 3048 m |
| Non-operating altitude | 0 - 4600 m |
| Heat dissipation | 1.109 BTU/h |
| Weight & dimensions | |
| Width | 442.5 mm |
| Depth | 44.2 mm |
| Height | 44 mm |
| Weight | 7.71 kg |
Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.