Introduction | |
---|---|
LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote power management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS power conditions Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. |
|
Features | |
UPS topology | Double-conversion (Online) |
Output power capacity | 5 kVA |
Output power | 4500 W |
Waveform | Sine |
Input operation voltage (min) | 160 V |
Input operation voltage (max) | 275 V |
Input frequency | 40 - 70 Hz |
Output operation voltage (min) | 220 V |
Output operation voltage (max) | 240 V |
Output frequency regulation | 50/60 Hz |
Surge energy rating | 480 J |
Efficiency | 94.1% |
Crest factor | 3:1 |
Emergency Power Off (EPO) | Y |
Output voltage Total Harmonic Distortion (THD) | 3% |
Noise level | 55 dB |
Surge protection | Y |
Audible alarm(s) | Y |
Auto-restart | Y |
Ports & interfaces | |
AC outlet types | C13 coupler, C19 coupler |
Power plug | Terminal |
AC outlets quantity | 10 AC outlet(s) |
Number of output IEC jumpers | 2 |
USB port | Y |
Serial interface | Y |
Serial interface type | RJ-45 |
SmartSlot | Y |
Battery | |
Battery technology | Sealed Lead Acid (VRLA) |
Battery capacity | 845 VAh |
Typical backup time at full load | 4 min |
Typical backup time at half load | 11.8 min |
Battery life (max) | 5 year(s) |
Battery recharge time | 1.5 h |
Hot-swap battery | Y |
Automatic battery test | Y |
Cold start | Y |
Replacement battery cartridge | APCRBC140 |
Design | |
Form factor | Rackmount |
Rack capacity | 3U |
Product colour | Black |
Display type | LCD |
International Protection (IP) code | IP20 |
Certification | REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, NOM, VDE |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 45 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 15000 m |
Technical details | |
Sustainability certificates | RoHS, ENERGY STAR |
Weight & dimensions | |
Width | 432 mm |
Depth | 719 mm |
Height | 130 mm |
Weight | 54.4 kg |
Package width | 610 mm |
Package depth | 960 mm |
Package height | 330 mm |
Package weight | 66.9 kg |
Packaging data | |
Rack mount kit | Y |
Bracket | Y |
Temperature sensor | Y |
Quick installation guide | Y |
Warranty card | Y |
Logistics data | |
Products per pallet | 6 pc(s) |
Other features | |
Packaging content | Web/SNMP Management Card |
Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.