MEDICAL-GRADE UPS 1000VA 750W

MEDICAL-GRADE UPS 1000VA 750W
Brand: EATON CORPORATION
Part Number: SMX1200XLHG
Stock:
Real time Stock Check

£796.97 (Excl VAT)
£956.37  (incl. VAT)

EATON CORPORATION
Introduction
Tripp Lite’s SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load, or 11 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.

Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.

The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Application Usage

This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX1200XLHG in this type of application will void the battery warranty.

Provides Ideal UPS Backup in Healthcare Facilities
Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise

Battery Backup and Full Surge Protection
27.5 minutes runtime for half load (375W); 11 minutes for full load (750W)
All six hospital-grade outlets provide surge protection rated to 340 joules
EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
Resistant to electrostatic discharge

LEDs and Audible Alarms Keep You Aware of Power Status
Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning
Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed

Saves Your Files, Even When You’re Away
Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures
Connects to your computer via either the DB9 port or USB port
Features
Output power capacity 1 kVA
Output power 750 W
Input operation voltage (min) 230 V
Input operation voltage (max) 230 V
Input frequency 50/60 Hz
Output operation voltage (min) 230 V
Output operation voltage (max) 230 V
Maximum current 10 A
Surge energy rating 340 J
EMI/RFI noise filtering Y
Surge protection Y
Power protection features Over voltage, Under voltage
Audible alarm(s) Y
Country of origin China
Ports & interfaces
AC outlet types C13 coupler
Power plug C14 coupler
AC outlets quantity 6 AC outlet(s)
Battery
Typical backup time at full load 11 min
Typical backup time at half load 27.5 min
Battery recharge time 4.5 h
Hot-swap battery Y
Cold start Y
Design
Form factor Tower
Product colour White
LED indicators Y
Certification CE, IEC 60601-1
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 50 °C
Operating relative humidity (H-H) 0 - 95%
Weight & dimensions
Width 190.5 mm
Depth 229.9 mm
Height 322.6 mm
Weight 20.6 kg
Package width 309.9 mm
Package depth 339.9 mm
Package height 469.9 mm
Package weight 22.1 kg
Logistics data
Master (outer) case width 309.9 mm
Master (outer) case length 339.9 mm
Master (outer) case height 469.9 mm
Master (outer) case gross weight 22.1 kg
Products per master (outer) case 1 pc(s)
Other features
Interface USB; DB9
No options for this product


Partners

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

Call us Now: 02920 333 000

Call us Now: 02920 333 000