HDMI OVER CAT6 EXTENDER KIT WITH KVM SUPPORT/ 4K 60HZ/ 4:4:4

HDMI OVER CAT6 EXTENDER KIT WITH KVM SUPPORT/ 4K 60HZ/ 4:4:4
Brand: EATON CORPORATION
Part Number: B127A-1A1-BHBH
Stock:
Real time Stock Check

£162.63 (Excl VAT)
£195.15  (incl. VAT)

EATON CORPORATION
Introduction
HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft....and More
The B127A-1A1-BHBH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.
Dip Switches Extend Your Choice of Either USB or IR.
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A1-BHBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the transmitter or receiver over Cat6 cable. LEDs on both unit will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the unit where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BHBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Features
Type AV transmitter & receiver
Maximum resolution 3840 x 2160 pixels
Cable types supported Cat5,Cat5e,Cat6,HDMI
Maximum transfer distance 70.1 m
Maximum refresh rate 60 Hz
Audio system Multichannel
Extended display identification data (EDID) Y
Audio output channels 7.1 channels
LED indicators Y
Material Metal
Colour depth 36 bit
3D Y
Rack mounting Y
Consumer Electronics Control (CEC) support Y
Wall mountable Y
Product colour Black
Ports & interfaces
Connectivity technology Wired
RJ-45 input ports 1
RJ-45 output ports 1
HDMI in 1
Number of HDMI outputs 2
USB ports quantity 3
USB version 1.1
USB connector type Micro-USB, USB Type-A
Digital audio optical out 1
Remote (IR) input 2
Remote (IR) output 2
DC-in jack Y
Power
AC input voltage 100 - 240 V
AC input frequency 50-60 Hz
Operating voltage 24 V
Input current 0.6 A
Output current 1 A
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 50 °C
Operating relative humidity (H-H) 0 - 85%
Weight & dimensions
Receiver dimensions (WxDxH) 115 x 62.4 x 27 mm
Receiver weight 450 g
Transmitter dimensions (WxDxH) 115 x 62.4 x 27 mm
Transmitter weight 450 g
Packaging data
Package width 260.1 mm
Package depth 164.1 mm
Package height 55.1 mm
Package weight 660 g
Packaging content
AC adapter included Y
Cables included IR
Included power plug types AU,EU,NA,UK
Manual Y
Mounting kit Y
Technical details
Country of origin Taiwan
Sustainability compliance Y
Sustainability certificates CE, REACH, RoHS
Logistics data
Master (outer) case width 573 mm
Master (outer) case length 273 mm
Master (outer) case height 175 mm
Master (outer) case gross weight 6.9 kg
Products per master (outer) case 10 pc(s)
Master (outer) case GTIN (EAN/UPC) 10037332258622
No options for this product

Partners

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

Call us Now: 02920 333 000