1000VA 750W MEDICAL GRADE UPS 230V AVR LITHIUM BATTERY 6 C13

1000VA 750W MEDICAL GRADE UPS 230V AVR LITHIUM BATTERY 6 C13
Brand: EATON CORPORATION
Part Number: SMX1200XLHGL
Stock:
Real time Stock Check

£1,824.06 (Excl VAT)
£2,188.87  (incl. VAT)

EATON CORPORATION
Introduction
1kVA/750W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout
This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.

Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease
This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 28 minutes of battery backup at half load and 10 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.

Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.

Built-In Isolation Transformer Offers Full Isolation
The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.

Connect Your Equipment to 6 IEC 320 C13 Outlets
Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.

Combats Electromagnetic Interference That Can Harm Equipment
Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won’t affect your equipment.

Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status
Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.

Saves Your Files, Even When You’re Away
USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite’s free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tower Form Factor for Easy Placement on a Nurse’s Station or Mobile Medical Cart
The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.
Features
UPS topology Line-Interactive
Output power capacity 1 kVA
Output power 750 W
Input operation voltage (min) 230 V
Input operation voltage (max) 230 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Output frequency regulation 50 - 60 Hz
Surge energy rating 340 J
Number of input phases 1
Country of origin China
Ports & interfaces
AC outlet types C13 coupler
Power plug C14 coupler
AC outlets quantity 6 AC outlet(s)
USB port Y
Serial interface Y
Battery
Battery voltage 36 V
Typical backup time at full load 11 min
Typical backup time at half load 27.5 min
Design
Form factor Tower
Housing material Polyvinyl chloride (PVC)
Product colour Grey
LED indicators Y
Operational conditions
Operating temperature (T-T) 32 - 104 °C
Storage temperature (T-T) 5 - 122 °C
Operating relative humidity (H-H) 0 - 95%
Weight & dimensions
Width 190.5 mm
Depth 229.9 mm
Height 322.6 mm
Weight 15.9 kg
Package width 309.9 mm
Package depth 339.9 mm
Package height 469.9 mm
Package weight 17.4 kg
Logistics data
Master (outer) case width 309.9 mm
Master (outer) case length 339.9 mm
Master (outer) case height 469.9 mm
Master (outer) case gross weight 17.4 kg
Products per master (outer) case 1 pc(s)
No options for this product

Partners

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

Call us Now: 02920 333 000