DISPLAYPORT TO HDMI OVER CAT6 EXT KVM SUPPORT 4K USB POC 70.1
Brand:
EATON CORPORATION
Part Number:
B127A-1A1-BDBH
Stock:
£177.86
(Excl VAT)
£213.43
(incl. VAT)
| Introduction | |
|---|---|
| DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Extends a 4K A/V Transmission up to 230 ft. The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively. Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet. Dip Switch Extends Your Choice of Either USB or IR. The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). TAA-Compliant for GSA Schedule Purchases The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. |
|
| Features | |
| Type | AV transmitter & receiver |
| Maximum resolution | 3840 x 2160 pixels |
| Cable types supported | Cat5,Cat5e,Cat6,HDMI |
| Maximum transfer distance | 70.1 m |
| Maximum refresh rate | 60 Hz |
| Audio system | Multichannel |
| Extended display identification data (EDID) | Y |
| Audio output channels | 7.1 channels |
| LED indicators | Y |
| Cable length | 1.38 m |
| HDCP | Y |
| Material | Metal |
| Colour depth | 36 bit |
| 3D | Y |
| Rack mounting | Y |
| Consumer Electronics Control (CEC) support | Y |
| Wall mountable | Y |
| HDCP version | 1.4/2.2 |
| Product colour | Black |
| Certification | TAA |
| Ports & interfaces | |
| Connectivity technology | Wired |
| RJ-45 input ports | 1 |
| RJ-45 output ports | 1 |
| HDMI in | 1 |
| Number of HDMI outputs | 1 |
| HDMI version | 2.0 |
| DisplayPorts in | 1 |
| USB ports quantity | 3 |
| USB version | 1.1 |
| USB connector type | Micro-USB, USB Type-A |
| Digital audio optical out | 1 |
| Remote (IR) input | 2 |
| Remote (IR) output | 2 |
| DC-in jack | Y |
| Power | |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50-60 Hz |
| Operating voltage | 24 V |
| Input current | 0.6 A |
| Output current | 1 A |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -15 - 50 °C |
| Operating relative humidity (H-H) | 0 - 85% |
| Weight & dimensions | |
| Receiver dimensions (WxDxH) | 115 x 62.4 x 27 mm |
| Receiver weight | 453.6 g |
| Transmitter dimensions (WxDxH) | 115 x 62.4 x 27 mm |
| Transmitter weight | 453.6 g |
| Packaging data | |
| Package width | 260.1 mm |
| Package depth | 164.1 mm |
| Package height | 55.1 mm |
| Package weight | 660 g |
| Package type | Box |
| Packaging content | |
| AC adapter included | Y |
| Included power plug types | AU,EU,NA,UK |
| Manual | Y |
| Mounting kit | Y |
| Technical details | |
| Country of origin | Taiwan |
| Sustainability compliance | Y |
| Sustainability certificates | CE, REACH, RoHS |
| Logistics data | |
| Master (outer) case width | 573 mm |
| Master (outer) case length | 273 mm |
| Master (outer) case height | 175 mm |
| Master (outer) case gross weight | 6.9 kg |
| Products per master (outer) case | 10 pc(s) |
| Master (outer) case GTIN (EAN/UPC) | 10037332258653 |
No options for this product
Partners
Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.
Call us Now: 02920 333 000
Call us Now: 02920 333 000
© 2024